Hondata FlashPro TuningCustom Throttle Plate Map

FlashPro advice and tuning help
Post Reply
User avatar

Topic author
Posts: 281
Joined: Fri Jul 29, 2011 4:20 pm
Location: Pretoria
Group: Registered users
Has thanked: 7 times
Been thanked: 2 times
Flag: Japan

Custom Throttle Plate Map

Post by blackhawk » Fri May 22, 2015 9:40 am

Hey guys
I developed this throttle map for my R and have been testing it for about a month. Quite happy with it!
The idea was to have a smooth and less sensitive response at low rpm and throttle opening for more control at low speeds, and a more aggressive response from vtec onwards.
In the high rpm band there are 2 humps, the lower one to help get the revs up quickly for heel-toeing on downshifts, and the upper one for a bit more control near max throttle opening.
Feel free to try it...
blackhawk tplate rev4.xlsx
It's easy to upload, but obviously you will need Flashpro.
Just copy the cells in the attached excel book from corner to corner (yellow cells), and paste it into the T.Plate table in your current tune (fpcal) in flashpro manager, save and upload onto your flashpro.
Obviously make sure you have a copy of your previous tune saved so you can go back to the previous throttle map if necessary.
And double check that the first column in your table is all ZEROS!

Disclaimer: Do this at your own risk, I take no responsibility for any damage, loss, etc, etc...
You do not have the required permissions to view the files attached to this post.

Post Reply